$context['previous_next'] = $modSettings['enablePreviousNext'] ? '' . $txt['previous_next_back'] . ' ' . $txt['previous_next_forward'] . '' : ''; Carb

Author Topic: Carb  (Read 453 times)

0 Members and 1 Guest are viewing this topic.

Offline Tritium

  • Full Member
  • *
  • Posts: 14
Carb
« on: August 18, 2011, 08:29:52 AM »
Which one is correct carb for C12: Amal 375 or 376?

Regards,

Tritium

Offline Willpower

  • Full Member
  • *
  • Posts: 121
Re: Carb
« Reply #1 on: August 18, 2011, 11:50:23 AM »
375/4 is fitted to the is fitted to my C12 and thats the type stated in the BSA Spares Manual 1954/7.
Mike
Fylde Coast
1956 C12

Offline Tritium

  • Full Member
  • *
  • Posts: 14
Re: Carb
« Reply #2 on: March 02, 2016, 08:33:48 AM »
Ok. What is the bore?

Online hampshirebiker

  • Silver Member
  • ***
  • Posts: 3304
  • Country: england
Re: Carb
« Reply #3 on: March 02, 2016, 08:50:32 AM »
This was covered a few topics down. All this information is on the site if you look.
Postal - Liphook Hants - But just into West Sussex.

Online Owen

  • Administrator
  • Gold Member
  • ****
  • Posts: 5759
  • Country: england
  • Solutions not problems
Re: Carb
« Reply #4 on: March 02, 2016, 12:20:50 PM »
Look at my post under http://bsac10c11c12.co.uk/smf/index.php?topic=9087.0 there is a list of carb specifications. Pete is going to put a Carb section in the parts and service sheet section for all to look at.
1945 C10 & C11
1953 C10
1953 C11 x 2
Still looking for an Original 350 side valve C12

Online timsdad

  • Gold Member
  • ****
  • Posts: 5997
  • Country: england
Re: Carb
« Reply #5 on: March 03, 2016, 07:16:46 AM »
That took a while for the follow-up query!

Ray
Just a motorcyclist.

Offline Tritium

  • Full Member
  • *
  • Posts: 14
Re: Carb
« Reply #6 on: March 14, 2016, 08:29:13 AM »
I will check the link. Thanks! :)