Author Topic: Dual seat info needed.  (Read 301 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
Dual seat info needed.
« on: April 16, 2011, 06:42:18 AM »
well my project C11G is moving along ok, getting ready to paint the frame, but at present lots of wet weather here. so am going to start on making a dual seat,
can someone please post the measurments of their seat please, just total length, width at rear,middle, and length from rear to where it starts to taper to front, and possibly a good pic of the seat, I havnt been able to buy anything suitable here.         Cheers Kevin..

Offline Brooklands

  • Bronze Member
  • **
  • Posts: 1157
Re: Dual seat info needed.
« Reply #1 on: April 17, 2011, 01:16:39 PM »
Hi Kevin,
The dimensions for the C11G seat base are -
Overall length  26.25"
Max width (at the point where a single seat would be at max) 12"
Nose 2.25"
Rear 9.125"

Between nose plates 2"
    "        rear    "     6.125"
    "          "     and front mounting hole centres  18.5", with rear hole elongated.

If you need more info/photos mail me at


Norfolk 'n good!


  • Guest
Re: Dual seat info needed.
« Reply #2 on: April 18, 2011, 10:37:02 PM »
Thanks for that Joe.. Kevin..