Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
Technical Section / Re: C11 fork clunk
« Last Post by camman3 on November 22, 2020, 08:09:24 pm »
  ;D ;D
22
Technical Section / Re: C11 fork clunk
« Last Post by Pete on November 22, 2020, 07:56:10 pm »
I weigh fork oil, so only use a thin oil.
23
Technical Section / Re: C11 fork clunk
« Last Post by Owen on November 22, 2020, 07:47:45 pm »
I run sae 20 and i'm 15 stone.
24
Technical Section / C12 front hub split?
« Last Post by Rewind on November 22, 2020, 07:46:57 pm »
Hi all, does anyone know if a front hub for a C12 can be split for cleaning/blasting and if so, how to split them?  if it is possible are the two halves keyed together so that the spoke holes stay in the correct alignment when it is put back together?
Thanks in advance,
Les
25
Technical Section / Re: C11 fork clunk
« Last Post by camman3 on November 22, 2020, 07:08:52 pm »
A good accurate 1/4 pint per leg will help as well.
Graham
26
Technical Section / Re: C11 fork clunk
« Last Post by lister man on November 22, 2020, 06:55:51 pm »
Yes have some 30 oil so will try that, I wonder if the damper rods conversion will fit the c11 ?
27
Technical Section / Re: C11 fork clunk
« Last Post by camman3 on November 22, 2020, 06:51:51 pm »
30w or even 40w may be better...even for your diminutive stature  ;)
Graham
28
Technical Section / Re: C11 fork clunk
« Last Post by lister man on November 22, 2020, 06:35:44 pm »
As said, they all clunk, part of the reason they are called old clunkers ;)
The shims on bushes just stops them rattling up and down in normal action.
A lot of us wont have experienced this particular clunk, as our generous proportions and low speeds prevent it ;D
Graham


I weigh 10 stone so maybe need a few more stone :)  I'm currently running it with 20 w oil in forks, I must admit it has done it since I bought it 6 months ago, thanks to everyone for your input

29
Technical Section / Re: Bsa c11 clutch
« Last Post by Owen on November 22, 2020, 03:59:43 pm »
The same applies to the sins done to Lucas equipment. If it's treated right it will work. 
30
Technical Section / Re: C11 fork clunk
« Last Post by camman3 on November 22, 2020, 01:39:22 pm »
As said, they all clunk, part of the reason they are called old clunkers ;)
The shims on bushes just stops them rattling up and down in normal action.
A lot of us wont have experienced this particular clunk, as our generous proportions and low speeds prevent it ;D
Graham
Pages: 1 2 [3] 4 5 ... 10