Author Topic: How to make your own transfers  (Read 817 times)

0 Members and 1 Guest are viewing this topic.

Offline ThomasC11

  • Full Member
  • *
  • Posts: 445
  • Country: de
How to make your own transfers
« on: April 18, 2016, 10:04:40 am »
Transfers are relatively expensive. The small „Minimum OIl Level“ (TRA-51) alone costs 2,22 Pounds at Draganfly (without shipping). A cheaper solution are self-adhesive plastic sheets (transparent or not) for laser printers. Single sheets are available at every good copy shop. One can then design transfers or copy from the internet in PowerPoint and print them on the plastic sheet. This is by far cheaper than off-the-shelf transfers, especially if one uses a single A4 sheet for many transfers.
Cheers, Thomas
1946 BSA C11
1937 Sunbeam Model 9
... and a dented Opel