Author Topic: 1954 C11G camshaft.  (Read 132 times)

0 Members and 1 Guest are viewing this topic.

Online rolariel

  • Full Member
  • *
  • Posts: 78
  • Country: gb
  • Location: Kidwelly, Carmarthenshire, South Wales
1954 C11G camshaft.
« on: January 13, 2020, 02:51:20 pm »
Hello, I wonder if anyone can help with this. I recently purchased a new camshaft for my 1954 C11G and the part number I received was 29-2076. On looking at my literature it states that 29-2076 is for a 1955/6 model and the 1954 camshaft is part number 29-2025. Kidderminster Motor Cycles, where I bought the cam from, say that this was just a subsequent number and that there is no difference. Can anyone confirm this? Thanks, Roland.

Offline Owen

  • Administrator
  • Gold Member
  • ****
  • Posts: 8244
  • Country: england
  • Solutions not problems
  • Location: Chandlers Ford, Hampshire
Re: 1954 C11G camshaft.
« Reply #1 on: January 13, 2020, 03:01:59 pm »
The part you have is one of the later(improved) ramped cams and will fit you bike. You will need to set your valve time up as per ramped cams.
1940 C12 (350cc)
1945 C10 & C11
1953 C10 & C11
Anyone want a1937 B20 in need of a hell of a good restoration.

Online camman3

  • Moderator
  • Gold Member
  • ****
  • Posts: 7861
  • Country: gb
  • The more I know, the less I understand......in UK
Re: 1954 C11G camshaft.
« Reply #2 on: January 13, 2020, 03:20:29 pm »
Yes, which is explained in very small print at foot of page
Graham
1957 C12
In sunny (sometimes) Christchurch, Dorset, UK

Online rolariel

  • Full Member
  • *
  • Posts: 78
  • Country: gb
  • Location: Kidwelly, Carmarthenshire, South Wales
Re: 1954 C11G camshaft.
« Reply #3 on: January 13, 2020, 10:13:52 pm »
Thank you both. Much more useful information than I could get elsewhere. Roland.

Offline timsdad

  • Gold Member
  • ****
  • Posts: 7850
  • Country: england
Re: 1954 C11G camshaft.
« Reply #4 on: January 14, 2020, 08:20:13 am »
Apart from about a million other places on this site, Roland. Camshafts have probably been the most regular discussion topic over the years in the technical sections.


Ray
Just a motorcyclist.