Author Topic: c12 swinging arm brackets  (Read 224 times)

0 Members and 1 Guest are viewing this topic.

Offline mrmend

  • Full Member
  • *
  • Posts: 12
  • Country: gb
  • Location: Manchester
c12 swinging arm brackets
« on: November 08, 2020, 04:45:28 pm »
Hello, can anyone tell me what fits to the 2x brackets on the swinging over the front pivot. It is a 1957 c12.  Please see photo.

Online ianinglis

  • Silver Member
  • ***
  • Posts: 2795
  • Country: england
  • Location: SPROATLEY NEAR HULL EAST YORKS
Re: c12 swinging arm brackets
« Reply #1 on: November 08, 2020, 05:13:06 pm »
not familiar with the C12 but could it be for the brake rod???



ian
BSA C10L 1956 - JFO 588
BSA C10L 1954 - MVE 107
RM6 RALEIGH RUNABOUT
ENFIELD DIESEL KUBOTA OC 95
BSA M21 RIGID RKN 816
CBF 1000
AUSTIN BIG 7

Online hampshirebiker

  • Gold Member
  • ****
  • Posts: 5805
  • Country: england
Re: c12 swinging arm brackets
« Reply #2 on: November 08, 2020, 05:14:41 pm »
I think they're both for the front end of the chain guard. certainly the outer one is. There are a lot of bits and bobs in that area.
Postal - Liphook Hants - But just into West Sussex.

Online Pete

  • Administrator
  • Silver Member
  • ****
  • Posts: 2923
  • Country: gb
Re: c12 swinging arm brackets
« Reply #3 on: November 08, 2020, 05:15:31 pm »
The swinging arm spindle anchors to the outside hole, and rear mudguard bracket fixes to the inside one.
See here https://bsac10c11c12.co.uk/smf/frame-forks-parts-lists/frame-fittings-c12/msg99831/#msg99831

Pete

Online Pete

  • Administrator
  • Silver Member
  • ****
  • Posts: 2923
  • Country: gb

Online hampshirebiker

  • Gold Member
  • ****
  • Posts: 5805
  • Country: england
Re: c12 swinging arm brackets
« Reply #5 on: November 08, 2020, 05:38:42 pm »
Is this any clearer? it is the front end of the chain guard on mine.
Postal - Liphook Hants - But just into West Sussex.

Offline mrmend

  • Full Member
  • *
  • Posts: 12
  • Country: gb
  • Location: Manchester
Re: c12 swinging arm brackets
« Reply #6 on: November 08, 2020, 06:01:14 pm »
Thanks, I have not got that far yet, thats sounds correct.

Offline mrmend

  • Full Member
  • *
  • Posts: 12
  • Country: gb
  • Location: Manchester
Re: c12 swinging arm brackets
« Reply #7 on: November 08, 2020, 06:06:09 pm »
Thanks for all your replies.

Online Pete

  • Administrator
  • Silver Member
  • ****
  • Posts: 2923
  • Country: gb
Re: c12 swinging arm brackets
« Reply #8 on: November 08, 2020, 07:00:42 pm »
I withdraw what I said. Diagram's are either misleading or unclear. Or I'm just being thick.... 

Online hampshirebiker

  • Gold Member
  • ****
  • Posts: 5805
  • Country: england
Re: c12 swinging arm brackets
« Reply #9 on: November 08, 2020, 07:06:16 pm »
Pete, I've had untold confusion with these exploded views over the years.
Postal - Liphook Hants - But just into West Sussex.