Author Topic: Dynamo  (Read 155 times)

0 Members and 1 Guest are viewing this topic.

Offline nige63

  • Full Member
  • *
  • Posts: 100
  • Country: gb
  • Location: cambridge
Dynamo
« on: October 17, 2020, 01:31:02 pm »
Hi Thinking of re-wiring my C11 is it possibly to rotate the dynamo to access the wires.

Online Owen

  • Administrator
  • Gold Member
  • ****
  • Posts: 8560
  • Country: england
  • Solutions not problems
  • Location: Chandlers Ford, Hampshire
Re: Dynamo
« Reply #1 on: October 17, 2020, 01:52:34 pm »
Loosen the dynamo to engine securing band and rotate the dynamo anti-clockwise to access the wires.
1940 C12 (350cc)
1945 C10 & C11
1953 C10 & C11

Offline nige63

  • Full Member
  • *
  • Posts: 100
  • Country: gb
  • Location: cambridge
Re: Dynamo
« Reply #2 on: October 17, 2020, 02:15:08 pm »
Thanks Owen.

Online Pete

  • Administrator
  • Silver Member
  • ****
  • Posts: 2897
  • Country: gb
Re: Dynamo
« Reply #3 on: October 17, 2020, 04:26:05 pm »
Be aware that will alter the dynamo chain tension, which will need readjusting, so you will need to take the chain cover off anyway.

Offline nige63

  • Full Member
  • *
  • Posts: 100
  • Country: gb
  • Location: cambridge
Re: Dynamo
« Reply #4 on: October 17, 2020, 04:40:27 pm »
OK thanks Pete.

Online Owen

  • Administrator
  • Gold Member
  • ****
  • Posts: 8560
  • Country: england
  • Solutions not problems
  • Location: Chandlers Ford, Hampshire
Re: Dynamo
« Reply #5 on: October 17, 2020, 06:55:48 pm »
Good point
1940 C12 (350cc)
1945 C10 & C11
1953 C10 & C11