Author Topic: Timing  (Read 251 times)

0 Members and 1 Guest are viewing this topic.

Offline Graham

  • Full Member
  • *
  • Posts: 31
  • Country: gb
  • Location: Kettering , Northamptonshire
Timing
« on: December 28, 2018, 04:42:31 pm »
As a rough starting point , where should my points backplate be in relation to the slotted holes ?
It’s a 58 C12 - all standard
Thanks

Offline camman3

  • Moderator
  • Gold Member
  • ****
  • Posts: 7390
  • Country: gb
  • The more I know, the less I understand......in UK
Re: Timing
« Reply #1 on: December 28, 2018, 05:19:02 pm »
If the points gap is set at 15 thou, then somewhere in the middle.
Graham
1957 C12
In sunny (sometimes) Christchurch, Dorset, UK

Offline Graham

  • Full Member
  • *
  • Posts: 31
  • Country: gb
  • Location: Kettering , Northamptonshire
Re: Timing
« Reply #2 on: December 28, 2018, 06:20:25 pm »
Thanks
It’s fully to the left at the moment ?
I thought the middle would be a starting point
Regards
Graham